M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar: overview
M.Tech. in Metallurgical and Materials Engineering fees at IIT Bhubaneswar
Here is how the fee on record breaks down. Fees are for the whole course unless marked otherwise, and apply to M.Tech programmes at IIT Bhubaneswar as a group.
| Fee | Amount |
|---|---|
| Total course fee | ₹1.28 lakh – ₹1.44 lakh |
| Tuition fee | ₹20,000 |
| Hostel fee | ₹90,000 – ₹1.06 lakh |
| Approximate cost per year | ₹64,000 |
Colleges revise fees most years, and hostel, transport and exam charges are often billed separately. Confirm the current figure with IIT Bhubaneswar before you pay anything.
M.Tech. in Metallurgical and Materials Engineering eligibility
Candidates applying for this program should meet the following criteria:
| Eligibility Criteria | Details |
|---|---|
| Educational Qualification | Bachelor's degree in Metallurgical, Materials, Mechanical, or related Engineering disciplines. |
| Minimum Percentage | At least 60% aggregate or equivalent CGPA (55% for SC/ST). |
| Entrance Exam | Valid GATE score in relevant disciplines. |
How to get admission to M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar
Here is the usual route in:
- Check that you meet the eligibility above and register for the entrance exam in time.
- Take GATE and keep your scorecard.
- Apply to IIT Bhubaneswar on its website (www.iitbbs.ac.in) or through the enquiry form on this page, and take part in counselling if a state or central body runs it.
- Once you are offered a seat, verify your documents (marksheets, ID, category certificate if any) and pay the admission fee to confirm it.
M.Tech. in Metallurgical and Materials Engineering placements at IIT Bhubaneswar
The latest placement figures on record (2024) show a placement rate of - BTech: 84.60%- MTech: 74.60%- Dual Degree: 66%, an average package of ₹22.6 lakh, a median package of ₹16.3 lakh and a highest package of ₹64 lakh at IIT Bhubaneswar. 235 students were placed that year. These are college-wide figures, not only for this specialisation.
For M.Tech. in Metallurgical and Materials Engineering specifically, the average salary on record is ₹7 lakh a year.
Placement numbers vary a lot by year and by branch. Ask the placement cell for the branch-wise report of the last two batches.
Other M.Tech specialisations at IIT Bhubaneswar
IIT Bhubaneswar runs 18 M.Tech specialisations in all. Worth comparing before you decide:
- M.Tech. in Manufacturing Engineering
- Discontinued (Sep 2022)- M.Tech. in Data Analytics
- M.Tech. in Structural Engineering
- M.Tech. in Mechanical System Design
- M.Tech. in Integrated Circuits and VLSI Systems
- M.Tech. in Environmental Engineering
- M.Tech. in Power System Engineering
- M.Tech. in Signal Processing and Communication Engineering
- Discontinued (Aug 2023) - M.Tech. in Materials Science and Engineering
- M.Tech. in Geotechnical Engineering
- Discontinued (Sep 2022)- M.Tech. in Design and Analysis of Experiments
- M.Tech. in Climate Science and Technology
- M.Tech. in Power Electronics and Drives
- M.Tech. in Water Resources Engineering
- M.Tech. in Thermal Science and Engineering
- M.Tech. in Transportation Engineering
- M.Tech. in Computer Science and Engineering
M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar: FAQs
What is the fee for M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar?
The total fee on record for M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar (IIT BBS) is ₹1.28 lakh – ₹1.44 lakh, about ₹64,000 a year. Hostel and other charges may be extra.
How long is M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar?
M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar (IIT BBS) is a 2-year full-time postgraduate course.
How many seats are there in M.Tech. in Metallurgical and Materials Engineering at IIT Bhubaneswar?
IIT Bhubaneswar (IIT BBS) has 22 seats in M.Tech. in Metallurgical and Materials Engineering each year.
What is the eligibility for M.Tech. in Metallurgical and Materials Engineering?
You usually need a B.Tech or B.E. in a related branch. Admission is usually through GATE. Check the college's prospectus for this year's cut-off.
What are the placements like at IIT Bhubaneswar?
In 2024, IIT Bhubaneswar recorded a placement rate of - BTech: 84.60%- MTech: 74.60%- Dual Degree: 66%, an average package of ₹22.6 lakh and a highest package of ₹64 lakh. These are college-wide figures.
Which other M.Tech specialisations does IIT Bhubaneswar offer?
Besides M.Tech. in Metallurgical and Materials Engineering, IIT Bhubaneswar offers M.Tech. in Manufacturing Engineering, Discontinued (Sep 2022)- M.Tech. in Data Analytics, M.Tech. in Structural Engineering, M.Tech. in Mechanical System Design, M.Tech. in Integrated Circuits and VLSI Systems, M.Tech. in Environmental Engineering, M.Tech. in Power System Engineering and M.Tech. in Signal Processing and Communication Engineering and 9 more.
Is IIT Bhubaneswar a government or private college?
IIT Bhubaneswar (IIT BBS) is a public/government institute, founded in 2008, located in Bhubaneswar, Orissa.