B.Tech. in Instrumentation and Control Engineering at CUSAT: overview
CUSAT, Kochi, Kerala, offers B.Tech. in Instrumentation and Control Engineering as a 4-year undergraduate degree. There are 40 seats in each batch. The total fee on record is ₹66,540 – ₹6.63 lakh, which works out to about ₹17,000 a year.
Expect to spend most of your time on measurement and control: sensors, transducers, process control and industrial automation.
CUSAT is a other institute, founded in 1971. This page brings together what is on record for this course at CUSAT — fees, seats, eligibility, the admission route and placements — so you can judge it before you apply.
What you study in B.Tech. in Instrumentation and Control Engineering
Most B.Tech programmes follow a similar pattern: the first year builds the foundations (mathematics, science and programming), the middle years go deep into the subject, and the final year is given over to electives, a major project and usually an internship.
Here that means measurement and control: sensors, transducers, process control and industrial automation. Typical first jobs: instrumentation or automation engineer in process industries. Many graduates also go on to a master's degree.
The exact syllabus is set by the college or its affiliating university and changes from year to year, so ask CUSAT for the current semester-wise plan.
B.Tech. in Instrumentation and Control Engineering fees at CUSAT
The fee figures on record for this course are below. Fees are for the whole course unless marked otherwise, and apply to B.Tech programmes at CUSAT as a group.
| Fee | Amount |
|---|---|
| Total course fee | ₹66,540 – ₹6.63 lakh |
| Tuition fee | ₹64,840 – ₹6.62 lakh |
| Approximate cost per year | ₹17,000 |
Colleges revise fees most years, and hostel, transport and exam charges are often billed separately. Confirm the current figure with CUSAT before you pay anything.
B.Tech. in Instrumentation and Control Engineering eligibility
To get into B.Tech. in Instrumentation and Control Engineering, you usually need Class 12 with Physics and Mathematics, plus Chemistry, Computer Science or another technical subject; most colleges ask for roughly 45–60% in these subjects. The minimum marks on record at CUSAT are: X: 0.0, XII: 50.0, Graduation: 0.0.
Admission to this kind of course is usually through JEE Main and state engineering entrance exams. Reserved-category candidates generally get a relaxation in the minimum marks. Check CUSAT's prospectus for the exact cut-off this year.
How to get admission to B.Tech. in Instrumentation and Control Engineering at CUSAT
In most years, admission follows these steps:
- Check that you meet the eligibility above and register for the entrance exam in time.
- Take JEE Main and state engineering entrance exams and keep your scorecard.
- Apply to CUSAT on its website (cusat.ac.in) or through the enquiry form on this page, and take part in counselling if a state or central body runs it.
- Once you are offered a seat, verify your documents (marksheets, ID, category certificate if any) and pay the admission fee to confirm it.
B.Tech. in Instrumentation and Control Engineering placements at CUSAT
The most recent placement data we hold (2024) show an average package of ₹7.32 lakh at CUSAT. These are college-wide figures, not only for this specialisation.
For B.Tech. in Instrumentation and Control Engineering specifically, the average salary on record is ₹6 lakh a year.
Placement numbers vary a lot by year and by branch. Ask the placement cell for the branch-wise report of the last two batches.
Other B.Tech specialisations at CUSAT
CUSAT runs 28 B.Tech specialisations in all. If this one is not quite right, compare it with:
- B.Tech. in Polymer Science and Engineering
- B.Tech. in Computer Science Engineering
- B.Tech. in Robotics and Automation Engineering
- Discontinued (Apr 2024)-B.Tech. in Instrumentation Technology
- B.Tech. in Mechanical Engineering
- B.Tech. in Safety and Fire Engineering
- B.Tech. in Electronics and Communication Engineering
- B.Tech. in in Electronics and Communication Engineering
- B.Tech. in Electrical and Electronics Engineering
- B.Tech. in in Electrical and Electronics Engineering
- B.Tech. in Computer Science and Engineering
- B.Tech. in Electronics and Communication Engineering
- B.Tech. in Safety and Fire Engineering
- B.Tech. in Civil Engineering
- B.Tech. in Marine Engineering
- B.Tech. in Information Technology
- B.Tech. in Naval Architecture and Ship Building
- B.Tech. in Civil Engineering
- Discontinued (Apr 2024)-B.Tech. in Mechanical Engineering
- B.Tech. in Information Technology
- B.Tech. in Electrical and Electronics Engineering
- B.Tech. in in Computer Science and Engineering
- B.Tech. in Computer Science and Engineering
- B.Tech. in Electronics and Communication Engineering
- B.Tech. in Computer Science and Engineering
- B.Tech. in Electrical and Computer Engineering
- Bachelor of Technology (B.Tech. Lateral Entry)
Is B.Tech. in Instrumentation and Control Engineering at CUSAT right for you?
Ask yourself — and the college — these questions first:
- Are you genuinely interested in measurement and control? You will spend 4 years on it.
- Can you manage ₹66,540 – ₹6.63 lakh over the course, plus hostel and living costs? Ask about scholarships and education loans.
- Are the placement figures above good enough for your goals? Ask for the branch-wise numbers.
- How does CUSAT compare with other colleges offering B.Tech in and around Kochi?
B.Tech. in Instrumentation and Control Engineering at CUSAT: FAQs
What is the fee for B.Tech. in Instrumentation and Control Engineering at CUSAT?
The total fee on record for B.Tech. in Instrumentation and Control Engineering at CUSAT is ₹66,540 – ₹6.63 lakh, about ₹17,000 a year. Hostel and other charges may be extra.
How long is B.Tech. in Instrumentation and Control Engineering at CUSAT?
B.Tech. in Instrumentation and Control Engineering at CUSAT is a 4-year full-time undergraduate course.
How many seats are there in B.Tech. in Instrumentation and Control Engineering at CUSAT?
CUSAT has 40 seats in B.Tech. in Instrumentation and Control Engineering each year.
What is the eligibility for B.Tech. in Instrumentation and Control Engineering?
You usually need Class 12 with Physics and Mathematics, plus Chemistry, Computer Science or another technical subject; most colleges ask for roughly 45–60% in these subjects. Admission is usually through JEE Main and state engineering entrance exams. Check the college's prospectus for this year's cut-off.
What are the placements like at CUSAT?
In 2024, CUSAT recorded an average package of ₹7.32 lakh. These are college-wide figures.
Which other B.Tech specialisations does CUSAT offer?
Besides B.Tech. in Instrumentation and Control Engineering, CUSAT offers B.Tech. in Polymer Science and Engineering, B.Tech. in Computer Science Engineering, B.Tech. in Robotics and Automation Engineering, Discontinued (Apr 2024)-B.Tech. in Instrumentation Technology, B.Tech. in Mechanical Engineering, B.Tech. in Safety and Fire Engineering, B.Tech. in Electronics and Communication Engineering and B.Tech. in in Electronics and Communication Engineering and 19 more.
Is CUSAT a government or private college?
CUSAT is a other institute, founded in 1971, located in Kochi, Kerala.
